YOUNCTA je novo ime medju proizvodjačima telekomunikacione opreme. Ipak radi se o proizvodjaču čija se istorija vezuje za Telletra-u, SIEMENS i ALCATEL. Sa novim vlasnikom i partnerom, ruskom kompanijom Micran, Youncta širi svoj proizvodni program mikrotalasnih radio linkova na UHF/VHF radio opremu, mikrotalasne (RF) komponente i radarske sisteme.
Mikrotalasni radio linkovi (6-40GHz)
web strana u pripremi
za više informacija obratite se na 011 785 4545 ili email@example.com
Y-packet is the high capacity packet full outdoor platform, realized to meet the requirements of WISP, ISP and Corporate markets alike. Y-Packet has been developed with an aim to be easy to install, inter-operable with other equipment in the network, and easily integrated with third parties Network Management Systems.
State-of-the Art Systems
Y-Packet supports state of art technologies, such as XPIC jointly with Layer One Aggregation and Adaptive Modulation from QPSK to 1024QAM. It provides capacity up to 840 Mbps at 56 MHz bandwidth within a frequency ranges from 6 GHz to 38 GHz.
Low cost of ownership
The full outdoor configuration of Y–Packet requires only 35 W of power consumption, resulting into a 26 dBm of output power. The build-in digital pre-distorter and the high output power allow the usage of small antennas, reducing consequently the rental costs of telecom towers due to reduced footprint.
Perfect management and security
The new network management system Y-NMS provides live monitoring of both individual station and the entire transport network from a remote location. Y-NMS provides a support for integrating SNMP v1/v2/v3 third party devices. Y-Packet can be managed over secure protocols such as HTTPS and SSH and users can be authenticated and authorized over RADIUS. Y-Packet is IPv6 ready.
Y-Packet: main features
|System types||1+0, 1+1 Hot Stand By, XPIC and 2+0 both with Layer 1 link Aggregation*, Repeater|
|Radio Capacity||Up to 420 Mbps Layer 2 @ 56 MHz and 1024 QAM in 1+0 configuration
Up to 840 Mbps Layer 2 @ 56 MHz and 1024 QAM in XPIC and 2+0 configurations with Layer 1 link aggregation
|Frequency Bands [GHz]||6L, 6U, 7, 8, 10.5, 11, 13, 15, 17, 18, 23, 24, 32, 38**|
|Modem||Modulation from 4QAM to 1024 QAM
ETSI Bandwidth from 7 MHz to 56 MHz
ANSI Bandwidth from 10 MHz to 60 MHz
Digital predistortion Reed Solomon and Convolutional FEC
Layer one Link Aggregation
|Ports||1 PoE GE, 1 XPIC RJ54 and 1 RSSI Alignment for Y-Link C 1 PoE GE, 1 SPF, 1 XPIC RJ45, 1 External Power Supply and 1 RSSI Alignment for Y-Link F|
|Ethernet & QoS||VLAN IEEE 802.1Q: Trunk, Access and Transparent
Jumbo Frames 9700 Bytes
DSCP and IEEE 802.1p Classifiers, 4 Queues scheduled as WRR and Strict
Configurable Buffer for long fiber distances
Flow control IEEE 802.3X
|Security||RADIUS user Authentication and Authorization.
Three user privileges HTTPS and SSH
Access Lists for SNMP, HTTP and HTTPS
|Management||Double IPv4 stack (Y-Link F only) and IPv6 SNMPv2
Y-NMS (own NMS)*
C-TAG and S-TAG on both IPv4 and IPv6 stacks
Up to 10 SNMP managers
Up to 10 SNMP Trap receivers
|Timing and Sync||Up to 5 NTP Servers
Transparent Synchronous Ethernet
|User Interface||Intuitive web interface based on AJAX technology
Detailed history activity logs
|Environment||From -33 (-50 °C option) °C to + 55 °C Packet-C and Packet-F
( Y-Packet-CI and Y-Packet FI )